Strand-by-strand guide
Bead colors
- A Light Blue 293 beads
- B Red 246 beads
- C Green 30 beads
- D White 27 beads
- E Yellow 10 beads
- F Brown 3 beads
Written strands
Thread each strand from the top: the first bead listed goes on first. Strand 1 (29 beads): 29×B Strand 2 (29 beads): B, 27×A, B Strand 3 (29 beads): B, 27×A, B Strand 4 (29 beads): B, 12×A, 2×D, 3×B, 2×C, 8×A, B Strand 5 (29 beads): B, 10×A, 3×B, D, 3×B, 2×C, 2×B, 6×A, B Strand 6 (29 beads): B, 9×A, 4×B, 2×D, 2×B, 2×C, 3×B, 5×A, B Strand 7 (29 beads): B, 8×A, B, 2×D, 2×B, D, 3×B, 2×C, 4×B, 4×A, B Strand 8 (29 beads): B, 8×A, B, 2×D, B, 2×D, 3×B, 2×C, 4×B, 4×A, B Strand 9 (29 beads): B, 4×A, 2×E, A, 6×B, D, 3×B, 2×C, 5×B, 3×A, B Strand 10 (29 beads): B, 4×A, 2×E, A, 6×B, 2×D, 2×B, 2×C, 5×B, 3×A, B Strand 11 (29 beads): B, A, 3×F, 2×E, A, 6×B, D, 3×B, 2×C, 5×B, 3×A, B Strand 12 (29 beads): B, 4×A, 2×E, A, 5×B, 2×D, 3×B, 2×C, 5×B, 3×A, B Strand 13 (29 beads): B, 4×A, 2×E, A, 6×B, D, 3×B, 2×C, 5×B, 3×A, B Strand 14 (29 beads): B, 8×A, 5×B, 2×D, 2×B, 2×C, 4×B, 4×A, B Strand 15 (29 beads): B, 8×A, 5×B, D, 3×B, 2×C, 4×B, 4×A, B Strand 16 (29 beads): B, 9×A, 3×B, 2×D, 3×B, 2×C, 3×B, 5×A, B Strand 17 (29 beads): B, 10×A, 3×B, D, 3×B, 2×C, 2×B, 6×A, B Strand 18 (29 beads): B, 12×A, B, 2×D, 2×B, 2×C, 8×A, B Strand 19 (29 beads): B, 27×A, B Strand 20 (29 beads): B, 27×A, B Strand 21 (29 beads): 29×B
This Christmas ornament pony bead pattern makes a small Christmas banner: a round red Christmas ornament with a yellow cap, a brown hanging string, a white zig-zag band, a green band and a white shine, on light blue beads framed in red. The banner is 21 strands wide and 29 beads long (609 beads), in 6 colors of pony beads. It is one of five small Christmas banners (Christmas tree, snowman, candy cane, gingerbread man and ornament) drawn in the same size, with the same light blue background and red frame, so they hang well side by side.
Follow the guide strand by strand: tie each strand to the rod, then thread its beads from the top down. The bead count for every color is in the list, so you know how many to buy (get a few spares).
The Christmas ornament pony bead tapestry, hanging
Seen straight on, the round red ornament hangs from a brown string under a yellow cap, with a white zig-zag band, a green band and a white shine, on light blue beads inside a red frame. The pictures on this page are previews made on the computer from the chart, not photos of a real banner.

It is a small banner (21 strands of 29 beads), so it fits on a bare bit of wall, above a console or next to the tree.

Close up of the Christmas ornament
Up close: the yellow cap and the brown string at the top, and the white zig-zag band across the red bauble.

Laid flat you can count it: 21 strands, 29 beads on each one, 609 beads in all.

How to start the Christmas ornament pony bead pattern
Strand 1 is the left frame: all 29 beads are red. Strands 2 to 3 are red at the top and bottom and light blue in between, and the first beads of the design come on strand 4.
Starting out: tie the cords to the rod one by one, then thread each strand from the top down.

Try it in another background color
The chart works on other background beads too. Here the 293 light blue beads are swapped for navy blue: every other bead stays the same, so the counts in the color list still apply, with navy blue in place of light blue.

How to make this banner
This banner has 21 strands side by side, and every strand holds 29 beads: 609 beads in all, in 6 colors. The beads hang in straight columns, one strand per column.
What you need
- Beads with a hole wide enough for your cord, such as pony beads, in the colors below (buy a few spare beads of each color)
- 21 strands of cord, each longer than 29 beads plus enough to tie it to the rod and to knot the end
- A wooden dowel or rod a little wider than 21 beads, and scissors
Bead count
- A Light Blue: 293 beads
- B Red: 246 beads
- C Green: 30 beads
- D White: 27 beads
- E Yellow: 10 beads
- F Brown: 3 beads
Steps
- Tie strand 1 to the left end of the rod.
- Thread its beads in the order of the guide: the first bead goes up against the rod, the last one is at the bottom.
- Tie a knot under the last bead so nothing slides off, then do strand 2 right next to it, and so on to strand 21.
The finished size depends on your beads: measure one bead and multiply by 21 across and 29 down. This banner has never been made with real beads, and the colors on screen are close matches, not exact ones. Make one strand first and check it against the picture.



