Strand-by-strand guide
Bead colors
- A Light Blue 273 beads
- B White 172 beads
- C Red 120 beads
- D Black 42 beads
- E Orange 2 beads
Written strands
Thread each strand from the top: the first bead listed goes on first. Strand 1 (29 beads): 29×C Strand 2 (29 beads): C, 27×A, C Strand 3 (29 beads): C, 27×A, C Strand 4 (29 beads): C, 27×A, C Strand 5 (29 beads): C, 18×A, 5×B, 4×A, C Strand 6 (29 beads): C, 5×A, D, 7×A, C, 2×A, 9×B, 2×A, C Strand 7 (29 beads): C, 5×A, D, 2×A, 3×B, 2×A, C, A, 11×B, A, C Strand 8 (29 beads): C, A, 3×D, C, D, A, 5×B, A, C, A, 11×B, A, C Strand 9 (29 beads): C, A, 3×D, C, D, 2×B, D, B, D, 2×B, C, 13×B, C Strand 10 (29 beads): C, A, 3×D, C, D, 5×B, D, B, C, 13×B, C Strand 11 (29 beads): C, A, 3×D, C, D, 3×B, E, B, D, B, C, 3×B, D, 2×B, D, 2×B, D, 3×B, C Strand 12 (29 beads): C, A, 3×D, C, D, 3×B, E, B, D, B, C, 13×B, C Strand 13 (29 beads): C, A, 3×D, C, D, 2×B, D, B, D, 2×B, C, 13×B, C Strand 14 (29 beads): C, A, 3×D, C, D, A, 5×B, A, 4×C, 9×B, A, C Strand 15 (29 beads): C, 5×A, D, 2×A, 3×B, 2×A, 4×C, 9×B, A, C Strand 16 (29 beads): C, 5×A, D, 7×A, C, 2×A, 9×B, 2×A, C Strand 17 (29 beads): C, 18×A, 5×B, 4×A, C Strand 18 (29 beads): C, 27×A, C Strand 19 (29 beads): C, 27×A, C Strand 20 (29 beads): C, 27×A, C Strand 21 (29 beads): 29×C
This snowman pony bead pattern makes a small Christmas banner: a white snowman with a black top hat and red hat band, black eyes, an orange nose, a black smile, a red scarf and three black buttons, on light blue beads framed in red. The banner is 21 strands wide and 29 beads long (609 beads), in 5 colors of pony beads. It is one of five small Christmas banners (Christmas tree, snowman, candy cane, gingerbread man and ornament) drawn in the same size, with the same light blue background and red frame, so they hang well side by side.
Follow the guide strand by strand: tie each strand to the rod, then thread its beads from the top down. The bead count for every color is in the list, so you know how many to buy (get a few spares).
The snowman pony bead tapestry, hanging
Seen straight on, the snowman wears a black top hat with a red band and a red scarf, with an orange nose, a black smile and three black buttons, on light blue beads inside a red frame. The pictures on this page are previews made on the computer from the chart, not photos of a real banner.

It is a small banner (21 strands of 29 beads), so it fits on a bare bit of wall, above a console or next to the tree.

In a kids room, next to a snowy window:

Close up of the snowman
Up close: two black eyes, a two-bead orange nose and a smile made of five black beads, under the brim of the hat.

Laid flat you can count it: 21 strands, 29 beads on each one, 609 beads in all.

How to start the snowman pony bead pattern
Strand 1 is the left frame: all 29 beads are red. Strands 2 to 4 are red at the top and bottom and light blue in between, and the first beads of the design come on strand 5.
Starting out: tie the cords to the rod one by one, then thread each strand from the top down.

Try it in another background color
The chart works on other background beads too. Here the 273 light blue beads are swapped for navy blue: every other bead stays the same, so the counts in the color list still apply, with navy blue in place of light blue.

How to make this banner
This banner has 21 strands side by side, and every strand holds 29 beads: 609 beads in all, in 5 colors. The beads hang in straight columns, one strand per column.
What you need
- Beads with a hole wide enough for your cord, such as pony beads, in the colors below (buy a few spare beads of each color)
- 21 strands of cord, each longer than 29 beads plus enough to tie it to the rod and to knot the end
- A wooden dowel or rod a little wider than 21 beads, and scissors
Bead count
- A Light Blue: 273 beads
- B White: 172 beads
- C Red: 120 beads
- D Black: 42 beads
- E Orange: 2 beads
Steps
- Tie strand 1 to the left end of the rod.
- Thread its beads in the order of the guide: the first bead goes up against the rod, the last one is at the bottom.
- Tie a knot under the last bead so nothing slides off, then do strand 2 right next to it, and so on to strand 21.
The finished size depends on your beads: measure one bead and multiply by 21 across and 29 down. This banner has never been made with real beads, and the colors on screen are close matches, not exact ones. Make one strand first and check it against the picture.



